Share

Vac-U-Lift operators and maintenance, lubrication inspection, and routine check Manual






 
  • Languages: English
    • PDF Email:$40.00

    This Manual Includes
    Information Manual
    Lubrication Manuals
    Maintenance Manuals
    Manual Covers Models
    A-100-158D
    Categories
    Vacuum Hoist System

    Vac-U-Lift operators and maintenance, lubrication inspection, and routine check Manual.

    1.0 SCOPE

    • Defines the manual’s purpose: inspection, lubrication, service, and proof load validation for the vacuum lifter.

    • Notes blank space for model-specific capacity (customizable for different units).

    2.0 SPECIAL EQUIPMENT REQUIRED

    • Declares that no special tools are needed—reduces complexity and increases convenience.

    3.0 INSTRUCTIONS

    Split into multiple conditions of use:

    3.1 – With Vacuum Pump “Off”

    • Inspect seals, hardware, and vacuum filter jar.

    • Tighten or replace worn components.

    3.2 – With Vacuum Pump “On” but No Load

    • Test airflow at pads.

    • Fill and verify the automatic oiler.

    • Confirm proper air cycling per pad.

    3.3 – With Vacuum Pump “Off” (Deeper Maintenance)

    • Clean full unit, mufflers, filters (including sintered bronze filters), and lubricate.

    3.4 – With Vacuum Pump “On” but No Load (Operational Test)

    • Visual check of general working condition.

    3.5 – With Unit Carrying Maximum Load

    • Monitor gauges and lights.

    • Validate vacuum buildup and steadiness.

    • Check mechanical performance under load.

    • Test reserve holding power (vacuum should not drop more than 3" in 15 minutes).

    • Validate “Vac-Off” release function.

     

    This manual empowers operators with clear, structured procedures that:

    • Ensure maximum uptime

    • Prevent costly failures

    • Provide a safe, standardized routine

    • Require no special tools

    • Serve as an essential part of compliance and safety documentation